Belzona 5821 (Immersion Grade)

A high-performance epoxy coating for the protection of critical equipment operating under immersion and erosive conditions.
Where to Buy

Belzona 5821 (Immersion Grade)

A high-performance epoxy coating for the protection of critical equipment operating under immersion and erosive conditions.
Where to Buy
Description

A 2-part, ceramic filled, epoxy coating applied by brush or spray for the protection of metallic and non-metallic surfaces operating under immersion conditions in contact with aqueous solutions.

Chemical-resistant coating, Belzona 5821, provides outstanding protection from the effects of salt, water, acids, alkalis, alcohols and hydrocarbons. The coating can be applied to virtually any rigid surface including cast iron, stainless steel, brass, copper, concrete, wood, fiberglass and aluminium.

  • Effective protection of critical equipment operating under immersion conditions in contact with aqueous solutions
  • Reduced health and safety risks as it is solvent-free
  • Easy application by brush or spray
  • Application and cure at room temperature – no hot work involved
  • Excellent chemical resistance against a wide range of chemicals such as sea water, salt, alkalis, alcohols and crude oil
  • Eliminates the need for replacement and reduces downtime
  • Excellent adhesion to virtually any rigid surface including cast iron, stainless steel, brass, copper, concrete, wood, fiberglass and aluminium
  • Epoxy coating for tanks, bunds, pumps, submersible pumps, pipes, heat exchangers and clarifiers operating under immersion
  • Protection of tanks and secondary containment areas from chemical attack and erosion and corrosion damage
  • Protection of pipework from erosion, corrosion and chemical attack
  • High strength adhesive for metal bonding

4 L, 15 L, 220 L and 800 L

Note: Sizing and availability may change per region. Please contact Belzona for details.

* All products are subject to regional restrictions. Check with your local Distributor for more information.

Product Applications

Documents

Similar Products

| Belzona 4131  | Belzona 4141  | Belzona 4124  | Belzona 4181  | Belzona 7111 

Can Be Used Together

| Belzona 4131 | Belzona 4124 | Belzona 4311 | Belzona 4511 | Belzona 4521 | Belzona 5231 | Belzona 5233 | Belzona 4151

https://prodapp.belzona.com/api/
https://khia.belzona.com/khiaapi/KhiasByProduct/

Featured Video

Projects

QUESTIONS & ANSWERS

The mixing ratio of the anti-corrosion coating, Belzona 5821 is 5 parts Base to 1 part Solidifier by weight. Or 3 parts Base to 1 part Solidifier by volume. Please see the Product Specification Sheet (PSS) for more information.
To apply the chemical-resistant coating, Belzona 5821, brush away any loose contamination and remove dirt and oil, and grease. Degrease with Belzona 9111 (Cleaner/Degreaser). Abrade the substrate, if necessary, to create the recommended profile. To mix the material, transfer the entire contents of the Solidifier container into the Base container. Mix thoroughly together to achieve a uniform material free of any streakiness. Next, apply Belzona 5821 directly onto the prepared surface with a short-bristled brush or rubber squeegee. As soon as possible after the application of the first coat, apply a further coat of Belzona 5821. Suitable areas may be coated by spray using heated airless equipment. Use either a single airless pump or plural equipment capable of metering accurately and mixing the two components. Lastly, allow the product to cure. Please see the Instructions for Use (IFU) for more information.
The cure time for the industrial coating, Belzona 5821 is as follows:
Temperature Light loading Full mechanical/ thermal loading or water immersion Chemical contact
50°F (10°C) 36 hours 8 days 12 days
68°F (20°C) 18 hours 5 days 7 days
86°F (30°C) 9 hours 2 days 5 days
Please see the Instructions for Use (IFU) for more information. Belzona 5821