Belzona 4511 (Magma-Flex Hi-Build)

A fast-curing, 2-part, flexible expansion joint filler designed to provide effective sealing of vertical, horizontal or sloped expansion joints.
Where to Buy

Belzona 4511 (Magma-Flex Hi-Build)

A fast-curing, 2-part, flexible expansion joint filler designed to provide effective sealing of vertical, horizontal or sloped expansion joints.
Where to Buy
Description

A fast-curing, 2-part, flexible expansion joint filler designed to provide effective sealing of construction and expansion joints on concrete, stone, brick and other surfaces. This solvent-free expansion joint sealant is a cost-effective and high performance alternative to conventional mastics and sealants, providing joints with up to ±12.5% flexibility and outstanding weather and chemical resistance. It does not require any hot work and cures quickly, ensuring a safe and easy application.

  • Provides expansion joint flexibility of up to ±12.5%
  • Downtime reduction due to its fast-curing properties
  • Reduced future maintenance and eliminates the need for expensive structural rebuild
  • Reduced health and safety risks as it is solvent-free
  • Application and cure at room temperature – no hot work involved
  • Excellent weather and chemical resistance against a wide range of chemicals
  • Easy to mix and apply manually with no specialist tools required
  • Excellent adhesion to surfaces including concrete, brick, stone and steel
  • Building joints sealing on vertical surfaces such as building faces, walls, parapet walls, retaining walls, dams, canal linings, bridges, overhead offsets, pipelines, sidewalks, concrete water tanks, spectator areas (bleachers, stands)
  • Expansion joints sealing on horizontal or tilted flat surfaces such as indoors/outdoors floors, ramps, roads, bridges, containment areas, railways, car parks, roofs, paving slabs, foundations

4.2 KG

Note: Sizing and availability may change per region. Please contact Belzona for details.

* All products are subject to regional restrictions. Check with your local Distributor for more information.

Product Applications

Documents

Similar Products

| Belzona 4131  | Belzona 4141  | Belzona 4124  | Belzona 4181  | Belzona 7111 

Can Be Used Together

| Belzona 4131 | Belzona 4124 | Belzona 4311 | Belzona 4511 | Belzona 4521 | Belzona 5231 | Belzona 5233 | Belzona 4151

https://prodapp.belzona.com/api/
https://khia.belzona.com/khiaapi/KhiasByProduct/

Featured Video

Projects

QUESTIONS & ANSWERS

Belzona recommends using Belzona 4511 as an expansion joint sealant.
The mixing ratio of the concrete expansion joint filler, Belzona 4511 is 6.4:1 (Base: Solidifier) by weight and 5.1:1 (Base: Solidifier) by volume. Please see the Product Specification Sheet (PSS) for more information.
To apply the vertical expansion joint sealant, Belzona 4511, the surface must be clean, dry, and firm, and it must be free of rust, paint, and other surface coatings and contaminants. In addition, any new concrete must be dry and cured for at least 28 days. Condition the area using Belzona 4911 (Magma TX Conditioner). Next, use a mechanical mixer when mixing entire units. Pre-mix the Base in the container. With the mixer running, slowly add the Solidifier into the Base while ensuring the mixer drill scrapes the bottom and sides of the container to achieve an even consistency. Otherwise, to mix by hand, mix partial quantities of the Base and Solidifier. Then, apply the Belzona 4511 into the joint avoiding air entrapment. When the joint is filled, a suitable scraper should be used to remove any excess material. Finally, allow the product to cure. Please see the Instructions for Use (IFU) for more information.