Belzona 4151 (Magma-Quartz Resin)

A 2-part epoxy resin for the treatment and protection of concrete surfaces exposed to chemical attack and abrasion.
Where to Buy

Belzona 4151 (Magma-Quartz Resin)

A 2-part epoxy resin for the treatment and protection of concrete surfaces exposed to chemical attack and abrasion.
Where to Buy
Description

A 2-part epoxy resin for concrete protection system ideally suited to surfaces exposed to chemical attack and abrasion which offers excellent resistance to a broad range of aggressive chemicals. This clear amber epoxy resin system bonds strongly to concrete, stone and other metallic and non-metallic surfaces. It provides a tough, seamless coating which is suitable for heavy duty dust proofing.

Concrete protection coating, Belzona 4151 (Magma-Quartz Resin), is also ideal for concrete grouting and bonding or as an overcoat to Belzona 4111 (Magma-Quartz) and Belzona 4131 (Magma-Screed), providing an excellent sealed surface. This versatile system can also be injected to accomplish repairs such as crack stabilisation.

  • Can be easily tinted
  • Simple application by brush, roller, squeegee or injection gun
  • Provides a hygienic surface
  • Reduced health and safety risks as it is solvent-free
  • Can be applied and cured under adverse conditions
  • Meets USDA requirements for incidental food contact
  • Excellent bonding to masonry and metallic surfaces including concrete, brick, marble and stone
  • Resistant to environmental attack
  • Sealing of chemical bund areas, concrete tanks and concrete areas such as steps, expansion joints, channels and gratings
  • Grouting, bonding and shimming of equipment such as supports, tiles and pumps
  • Versatile material for the securing loose railings and anchor bolts

6KG, 72KG, 77KG, and 636KG

Note: Sizing and availability may change per region. Please contact Belzona for details.

* All products are subject to regional restrictions. Check with your local Distributor for more information.

Product Applications

Documents

Similar Products

Can Be Used Together

| Belzona 1221

https://prodapp.belzona.com/api/
https://khia.belzona.com/khiaapi/KhiasByProduct/

Featured Video

Projects

QUESTIONS & ANSWERS

Concrete can be safeguarded using Belzona’s concrete protection coatings. These resurface the existing substrate and provide a protective barrier from physical impact, chemicals, and water.

To apply the two-part epoxy resin, Belzona 4151 (Magma-Quartz Resin), the surface must be clean, firm, and dry. New concrete should be allowed to cure for a minimum of 28 days. Next, to mix the material, empty the entire contents of the Base and Solidifier units into a suitable mixing vessel. Mix thoroughly for 3 minutes until a uniform mix is achieved. Then, apply the material with a good-quality brush. A second coat should be applied, as soon as possible without disturbing the first coat, but never after longer than three hours. Finally, allow the material to cure. Please see the Instructions for Use (IFU) for more information.
The cure time of the concrete grouting system, Belzona 4151 (Magma-Quartz Resin), is as follows:
Resist pedestrian traffic Full mechanical hardness Full chemical resistance
41 °F (5 °C) 16 hours 2 days 14 days
59 °F (15 °C) 6 hours 24 hours 10 days
77 °F (25 °C) 4 hours 16 hours 5 days
Please see the Instructions for Use (IFU) for more information. Belzona 4151