Belzona 3412 (Encapsulating Membrane)

Flexible and peelable coating, used for encapsulating flanges and bolt fastenings to protect against moisture ingress and prevent corrosion.
Where to Buy

Belzona 3412 (Encapsulating Membrane)

Flexible and peelable coating, used for encapsulating flanges and bolt fastenings to protect against moisture ingress and prevent corrosion.
Where to Buy
Description

A 2-part, liquid-applied emergency roof repair material providing instant waterproofing of leaking roof areas. Belzona 3121 (MR7) is a flexible membrane and bonds strongly to all common roofing surfaces including slate roofs, tile roofs, asphalt, felt, asbestos cement sheet roofs and metal roofs, even during adverse weather conditions.

This fast-curing, all climate roof repair coating incorporates a reinforcement sheet which ensures the coating will adapt to roof movements and follows complex roofing contours. This roof waterproofing membrane is water resistant immediately after application and can cure even if fully immersed in water.

  • Outstanding corrosion protection
  • Peelable and resealable system, allowing easy access to fastenings if required
  • High visibility colour making repairs easily identifiable
  • Simple and quick to apply with no associated hot work
  • Fast cure to allow quick application
  • Excellent adhesion onto manually prepared surfaces
  • Excellent UV and environmental weathering resistance
  • Excellent heat resistance
  • Good fire resistance
  • Classed as low hazard making it safe to use
  • Brush or spray applicable
  • Sealing of flanges, fastenings, fittings, connectors and other associated pipe elements
  • Preventing or stopping moisture ingress in various systems
  • Protection of new equipment from corrosion

* All products are subject to regional restrictions. Check with your local Distributor for more information

515 g

Note: Sizing and availability may change per region. Please contact Belzona for details.

Product Applications

Documents

Similar Products

| Belzona 4131  | Belzona 4141  | Belzona 4124  | Belzona 4181  | Belzona 7111 

Can Be Used Together

| Belzona 4131 | Belzona 4124 | Belzona 4311 | Belzona 4511 | Belzona 4521 | Belzona 5231 | Belzona 5233 | Belzona 4151

https://prodapp.belzona.com/api/
https://khia.belzona.com/khiaapi/KhiasByProduct/

Featured Video

Projects

QUESTIONS & ANSWERS

The flange encapsulation system, Belzona 3412, works by creating a multilayer barrier designed to exclude moisture and prevent crevice, galvanic and atmospheric corrosion.

The flange protection system, Belzona 3412, can be applied in two ways: by brush or spray. To apply by brush or spray, first clean the surface of the pipe and flanged connections to remove all dirt, grease, and other surface contaminants. If applicable, thoroughly abrade the surface with abrasive paper (sandpaper) or wire brush to remove all gloss and provide a good key for the Belzona coating. Then, apply masking tape over the two bond areas to protect the pipe areas from accidental overspray. To allow access to bolts and flanges in the event of required maintenance, we recommend the application of Belzona 8411 by brush or spray. This also provides an optimum level of corrosion protection. Once the Belzona 8411 is touch dry, remove the masking tape. After, re-apply fresh masking tape. To seal the gap between the flange faces, cut a strip of Belzona 9341 to the correct width and apply it over the gap. Next, fit plastic caps over the nuts/bolts.
  • Brush: At this point, empty the Belzona 3412 base and solidifier contents and thoroughly mix in the bowl provided for at least three minutes. Transfer the mixed Belzona 3412 to the flange face and bolts using a spatula. Using long, light strokes, brush the material over the entire area, ensuring it does not extend outside the prepared area. While the first coat of Belzona 3412 is still wet, bed strips of Belzona 9311 around the circumference of both ends of the pipe and the flange. Finally, mix and apply the second coat of Belzona 3412.
    •  
  • Spray: At this point, empty the Belzona 3412 base and solidifier contents and thoroughly mix in the bowl provided for at least three minutes. Fill the cartridge of the Belzona Spray Gun. Spray the material over the entire area, ensuring it does not extend outside the prepared area. While the first coat of Belzona 3412 is still wet, bed strips of Belzona 9311 around the circumference of both ends of the pipe and the flange. Finally, mix and apply the second coat of Belzona 3412.
    •   Please see the Instructions for Use (IFU) for more information: Belzona 3412
    The cure times of the peelable coating, Belzona 3412, are as follows:
    Relative humidity Substrate temperature
    41°F (5°C) 50°F (10°C) 68°F (20°C) 104°F (40°C)
    Full cure 30% 7 days 6 days 5 days 4 days
    50% 6 days 5 days 4 days 3 days
    80% 5 days 4 days 3 days 2 days
    Please see the Instructions for Belzona 3412 Use (IFU)for more information: