Belzona 2221 (MP Fluid Elastomer)

A tough, abrasion resistant polyurethane elastomer for the repair and coating of rubber components and metal surfaces and casting of new components.
Where to Buy

Belzona 2221 (MP Fluid Elastomer)

A tough, abrasion resistant polyurethane elastomer for the repair and coating of rubber components and metal surfaces and casting of new components.
Where to Buy
Description

Belzona 2221 (MP Fluid Elastomer) is a 2-part, abrasion resistant polyurethane elastomer for the repair and coating of rubber components and metal surfaces and casting of new components. This flexible rubber repair material makes cost effective repairs possible and is designed for applications where durability and elasticity are required. It is easy to mix and apply by brush or by pouring without the need for specialist tools and will cure at room temperature, eliminating the need for hot work and vulcanisation.

  • Application and cure at room temperature – no hot work involved
  • Can be used for casting applications
  • Excellent adhesion to a wide variety of substrates including natural rubber, nitrile, neoprene, SBR (Styrene Butadiene Rubber), polyurethane, PVC, steel, copper and concrete
  • Reduced health and safety risks as it is solvent-free
  • Seamless application small or large areas treated in one operation
  • Good chemical resistance to a wide variety of chemicals
  • Outstanding elongation – up to 700%
  • Good electrical resistance
  • Protection against erosion and corrosion
  • Creation and repair of concrete expansion joints to provide long-term performance
  • Creation or casting of gasket seals
  • Cold-curing alternative to vulcanized rubber repair of rubber linings
  • Sealing SF6 gas leaks providing environmental protection
  • Casting of new rubber components
  • Protection of exposed threads
  • Fast rubber repair of holes and cracks on pump diaphragms

* All products are subject to regional restrictions. Check with your local Distributor for more information*

750 g

Note: Sizing and availability may change per region. Please contact Belzona for details.

Product Applications

Documents

Similar Products

| Belzona 1813  | Belzona 1814  | Belzona 1818  | Belzona 1812 

Can Be Used Together

| Belzona 1121 | Belzona 1131 | Belzona 1151 | Belzona 1161 | Belzona 1311 | Belzona 1818 | Belzona 1814

https://prodapp.belzona.com/api/
https://khia.belzona.com/khiaapi/KhiasByProduct/

Featured Video

Projects

QUESTIONS & ANSWERS

Abrasion-resistant rubber linings are polyurethane-based coatings whose properties allow them to endure constant wearing while safeguarding the substrate beneath the coating.
The steps to apply the rubber repair system, Belzona 2221 (MP Fluid Elastomer), are as follows: Clean the application area with Belzona 9111 (Cleaner/ Degreaser). If oil continues to form, abrade the surface with a suitable roughing tool. Apply a thin, even coat of Belzona 2911 (Elastomer QD Conditioner) or Belzona 2921 (Elastomer GP Conditioner) onto the surface with a brush. Empty the entire contents of the Base and Solidifier containers into the mixing bowl provided and mix for at least 2 minutes until the material is an even consistency and color. Apply the Belzona 2221 (MP Fluid Elastomer) to the prepared surface with a stiff bristle brush. Or the plastic applicator provided. Allow to cure. For more information, please see the Instructions for Use (IFU): Belzona 2221
The cure time of the polyurethane resin, Belzona 2221 (MP Fluid Elastomer), is as follows:
Light loading Full mechanical loading Immersion in chemicals
50°F (10°C) 24 hours 72 hours 5 days
68°F (20°C) 12 hours 36 hours 3 days
86°F (30°C) 9 hours 32 hours 2.5 days
104°F (40°C) 6 hours 28 hours 2 days
For more information, please see the Instructions for Use (IFU): Belzona 2221