Belzona 1391T

 Hand-applied erosion, corrosion, and heat-resistant epoxy coating for high-temperature equipment operating under immersion up to 120°C (248°F).
Where to Buy

Belzona 1391T

 Hand-applied erosion, corrosion, and heat-resistant epoxy coating for high-temperature equipment operating under immersion up to 120°C (248°F).
Where to Buy

Description

Belzona 1391T is a 2-part, high-temperature epoxy coating which provides erosion and corrosion protection to equipment operating under immersion up to 248°F (120°C ). It offers excellent resistance to a wide range of aqueous solutions, hydrocarbons, and process chemicals.

This 2-coat, solvent-free, high-performance epoxy coating is applied using simple hand tools to areas requiring maximum erosion resistance. It has a long overcoat window and can be rapidly force cured allowing applications to be effectively completed with minimal downtime, shortening application time, and simplifying maintenance procedures.

For situations where a sprayable coating is required,  Belzona 1391S is the perfect solution.

  • Multi-purpose durable metal-epoxy paste
  • Operates at high temperature under immersed conditions
  • Excellent erosion and corrosion resistance
  • Reduced health and safety risks as it is solvent-free
  • Good electrical insulation properties
  • High compressive strength
  • Application and cure at room temperature – no hot work involved
  • Excellent chemical resistance against a wide range of chemicals
  • No shrinkage, expansion, or distortion
  • Excellent bonding to many metal surfaces including steel, stainless steel, specialist steels
  • Suitable for steaming out up to 210°C (410°F)
  • Protecting pumps, valves, hot water tanks, and separators from the effects of erosion and corrosion
  • High strength structural adhesive for metal bonding
  • Creation of irregular load bearing shims

* All products are subject to regional restrictions. Check with your local Distributor for more information

Product Applications

Documents

Similar Products

| Belzona 4131  | Belzona 4141  | Belzona 4124  | Belzona 4181  | Belzona 7111 

Can Be Used Together

| Belzona 4131 | Belzona 4124 | Belzona 4311 | Belzona 4511 | Belzona 4521 | Belzona 5231 | Belzona 5233 | Belzona 4151

https://prodapp.belzona.com/api/
https://khia.belzona.com/khiaapi/KhiasByProduct/

Featured Video

Projects

QUESTIONS & ANSWERS

The ceramic coating, Belzona 1391T provides corrosion protection by creating a barrier that prevents a variety of chemicals from permeating the epoxy material and reaching the substrate underneath.
To ensure an effective molecular weld, only apply the ceramic polymer coating, Belzona 1391T, to clean, firm, dry, and well-roughened surfaces. To achieve this, firstly clear away any loose contamination and use Belzona 9111 (Cleaner/Degreaser) to clean and degrease the surface. Following this, roughen the surface by blast cleaning, deeply scoring, or grinding. Degrease the surface again, allowing the surface to dry before combining the reactive components. To do this, transfer the entire contents of the Solidifier container into the Base container. Mix thoroughly to achieve a uniform material free of any streakiness. Next, apply the Belzona 1391T directly onto the prepared surface with a stiff-bristled brush or with the plastic applicator provided at the recommended coverage rate. Belzona 1391T can be overcoated as soon as it is firm enough to do so.

Finally, mixing tools should be cleaned immediately after use with Belzona 9111 or any other effective solvent e.g., Methyl Ethyl Ketone (MEK). Application tools should be cleaned with Belzona 9121, MEK, or cellulose thinners.

For more information, read the Instructions for Use (IFU): Belzona 1391T

The cure time of the heat-resistant epoxy coating, Belzona 1391T varies on the ambient temperature condition. The cure time is as follows:
Ambient temperature Time until inspection Time until full service Time until post-cure (if required)
Dry Wet
50°F/ 10°C 72 hours Post0cure required 72 hours 28 days
68°F/ 20°C 24 hours 28 days 24 hours 7 days
86°F/ 30°C 12 hours 10 days 12 hours 48 hours
104°F/ 40°C 5 hours 24 hours 5 hours 12 hours
  Post-cure will generally be unnecessary as the coating will cure sufficiently at ambient temperature; however, post-cure is possible if desired for a quicker return to service. The coating should be heated between 122°F/ 50°C and 212°F/ 100°C for a minimum of 1 hour. For more information, see the Instructions for Use (IFU): Belzona 1391T