To ensure an effective molecular weld, only apply the high-temperature coating, Belzona 1391S, to clean, firm, dry, and well-roughened surfaces. To achieve this, firstly clear away any loose contamination and use Belzona 9111 (Cleaner/Degreaser) to clean and degrease the surface. Following this, roughen the surface by blast cleaning, deeply scoring, or grinding. Degrease the surface again, allowing the surface to dry before combining the reactive components. To do this, Belzona 1391S must be applied using specialized equipment: a single airless pump or plural equipment capable of metering accurately and mixing the two components can be used. Transfer the Solidifier and Base into heated airless equipment and continuously spray the product. Finally, mixing tools should be cleaned immediately after use with Belzona 9111 or any other effective solvent e.g., Methyl Ethyl Ketone (MEK). For more information, refer to ‘instructions for spraying Belzona solvent-free coatings:’ https://khia.belzona.com/assets/data/app_know_how/application/spray%20application%20of%20belzona%202009.pdf For more information, read the Instructions for Use (IFU): Belzona 1391S (IFU)

Heat resistant epoxy, Belzona 1391S can be bought from a local authorized Belzona distributor. For steps on how to contact an authorized Belzona distributor follow the link: https://www.belzona.com/distributor-finder/

The high-temperature epoxy coating, Belzona 1391S provides corrosion protection by creating a barrier that prevents a variety of chemicals from permeating the epoxy material and reaching the substrate underneath.