Belzona 1341 (Supermetalglide)

An epoxy coating designed to improve efficiency of pumps, pipes, valves and other fluid handling equipment while providing outstanding erosion and corrosion protection.
Where to Buy

Belzona 1341 (Supermetalglide)

An epoxy coating designed to improve efficiency of pumps, pipes, valves and other fluid handling equipment while providing outstanding erosion and corrosion protection.
Where to Buy
Description

A 2-part epoxy coating designed to improve efficiency of pumps, pipes, valves and other fluid handling equipment while protecting them from the effects of erosion and corrosion. This high performance product is proven to reduce energy consumption, provide excellent chemical resistance and lower maintenance costs.

Belzona 1341 (Supermetalglide) improves pump efficiency by using hydrophobic technology to repel process fluids and reduce turbulent flow. Efficiency increases of up to 7% have been recorded on new equipment and up to 20% on refurbished equipment.

Belzona 1341 (Supermetalglide) epoxy coating – belong to belzona products – Erosion-Corrosion Metals series 1000.

  • Improved efficiency of pumps, pipes, valves, and other equipment
  • Long-term erosion and corrosion protection
  • Excellent chemical resistance against a wide range of chemicals
  • Suitable for contact with potable water
  • Reduced health and safety risks as it is solvent-free
  • Application and cure at room temperature – no hot work involved
  • Long working life
  • Excellent bonding to metals including stainless steel, duplex steels, carbon steel, aluminum, cast iron, and bronze as well as specialist alloys and other materials
  • Protecting pump volutes and impellers from erosion and corrosion
  • Internal pipe coatings to increase fluid flow
  • Long-term corrosion protection of tube sheets heat exchangers, water boxes, and water tanks
  • Reducing material hang-up in chutes and hoppers
  • Erosion-resistant coating for leading-edge protection on wind turbine blades.

* All products are subject to regional restrictions. Check with your local Distributor for more information

ABS Approval
NSF/ANSI 61 – 2016: Drinking Water System Components – Health Effects
WRAS Approved Material
China Classification Society
Product Applications

Documents

Similar Products

| Belzona 4131  | Belzona 4141  | Belzona 4124  | Belzona 4181  | Belzona 7111 

Can Be Used Together

| Belzona 4131 | Belzona 4124 | Belzona 4311 | Belzona 4511 | Belzona 4521 | Belzona 5231 | Belzona 5233 | Belzona 4151

https://prodapp.belzona.com/api/
https://khia.belzona.com/khiaapi/KhiasByProduct/

Featured Video

Projects

QUESTIONS & ANSWERS

To apply the epoxy coating Belzona 1341 (Supermetalglide) on steel substrates, only apply the coating to clean, firm, dry, and well-roughened surfaces. To achieve this, firstly clear away any loose contamination and use Belzona 9111 (Cleaner/Degreaser) to clean and degrease the surface. Following this, roughen the surface by blast cleaning, deeply scoring, or grinding. Degrease the surface again, allowing the surface to dry before combining the reactive components. To do this, transfer the entire contents of the Solidifier container into the Base container. Mix thoroughly to achieve a uniform material free of any streakiness. Next, apply the Belzona 1341 (Supermetalglide) directly onto the prepared surface with a stiff-bristled brush or with the plastic applicator provided at the recommended coverage rate. On suitable areas, a spray application is possible using a heated airless spray with a setup of 63: 1 airless spray unit with either an in-line heater or trace heated lines. Finally, mixing tools should be cleaned immediately after use with Belzona 9111 or any other effective solvent e.g., Methyl Ethyl Ketone (MEK). Application tools should be cleaned with Belzona 9121, MEK, or cellulose thinners. For more information, read the Instructions for Use (IFU): Belzona 1341
The industrial coating, Belzona 1341 (Supermetalglide), improves pump efficiency by using hydrophobic technology to repel process fluids and reduce turbulent flow. Efficiency increases of up to 7% have been recorded on new equipment and up to 20% on refurbished equipment. For more information, see the Product Flyer: Belzona 1341
Anti-corrosion coating, Belzona 1341 (Supermetalglide) can be bought from a local authorized Belzona distributor. For steps on how to contact an authorized Belzona distributor follow the link: https://www.belzona.com/distributor-finder/