Belzona 7111 (Industrial Grade)

Specially designed to endure the physical and thermal shock common to Industrial environments.
Where to Buy

Belzona 7111 (Industrial Grade)

Specially designed to endure the physical and thermal shock common to Industrial environments.
Where to Buy
Description

A cost-effective, 2-part, 100% solids chocking/grouting material designed to endure the physical and thermal shock common in industrial environments. Belzona 7111 is pourable and is specially formulated to spread out evenly across irregular surfaces.

It is ideal for repairing damaged foundations to support and maintain precise alignment under machinery ensuring effective bearing underneath, where performance and operating reliability are critical.

  • Pressure, impact and vibration resistant
  • Provides precise equipment alignment
  • Dampens machine noise and vibration
  • Prevents loosening of threaded bolts
  • High load-bearing capacity is achieved for the structure
  • Reduced installation times
  • Does not require heat or special tools
  • Pumps
  • Generators
  • Steam and gas turbines
  • Wind turbine foundations
  • Compressors
  • Blowers
  • Engines
  • Plate mills electric motors
  • Pulverizers
  • Crane rails
  • Lathes
  • Gear drives
  • Ball mills
  • Rail car unloaders

* All products are subject to regional restrictions. Check with your local Distributor for more information*

6.95 KG

Note: Sizing and availability may change per region. Please contact Belzona for details.

ABS Approval
DNV GL Approval
Lloyd’s Register’s Certificate of Acceptance 

* All products are subject to regional restrictions. Check with your local Distributor for more information.

Product Applications

Documents

Similar Products

Can Be Used Together

| Belzona 1221

https://prodapp.belzona.com/api/
https://khia.belzona.com/khiaapi/KhiasByProduct/

Featured Video

Projects

QUESTIONS & ANSWERS

A load-bearing shim is an object or substance used to level a surface to ensure it can support any structure above it.

There are two variations of Belzona 7111: Belzona 7111 (Marine Grade) and Belzona 7111 (Industrial Grade), but both are applied similarly. Pour the mixed Belzona 7111 into the dam immediately after mixing. Allow the product to flow freely across and underneath the equipment in a thin stream to avoid excessive bubbling. Always check for any potential leaks around the perimeter of the dam. If any, stop pouring Belzona 7111 and quickly seal the leak point with a quick set caulking compound or similar product. Then, allow Belzona 7111 to fully cure. Next, carefully remove the front metal/wood piece from the dam with a hammer or mallet. Finally, smooth off the sharp edges of the product using a grinder, if needed. Please see the Instructions for Use (IFU) for more information.
The cure time for the high impact load bearing shim system, Belzona 7111 is as follows:
Temperature 41°F (5°C) 60°F (15°C) 68°F (20°C) 86°F (30°C) 104°F (40°C)
Cure times Post curing 48 hours 24 hours 12 hours 8 hours
Please see the Instructions for Use (IFU) for more information. Belzona 7111