Belzona 5813

High-performance static dissipative ESD coating for concrete protection.
Where to Buy

Belzona 5813

High-performance static dissipative ESD coating for concrete protection.
Where to Buy
Description

Belzona 5813 is a solvent-free, two-component, static dissipative ESD coating.

This epoxy coating system is designed to transfer surface electrostatic charge build-up away from hazardous areas. Due to its excellent static dissipative properties, Belzona 5813 helps to eliminate electrostatic charge where flammable materials are stored.

Surfaces coated with Belzona 5813 prevent sparks, shorts, sudden discharge that can lead to an explosion.

Belzona 5813 is easy to mix and can be applied without the need of specialists tools.

  • Static dissipative and chemically resistant coating for primary and secondary chemical containment areas
  • Fuel storage tanks where fluid is agitated i.e. pumping and piping and filtration systems
  • Static dissipative coating for refineries and grain silos, highly susceptible to static charge accumulation
  • Static dissipative floor coatings for factories and warehouses

4 L

Note: Sizing and availability may change per region. Please contact Belzona for details.

* All products are subject to regional restrictions. Check with your local Distributor for more information.

Product Applications

Documents

Similar Products

Can Be Used Together

| Belzona 1221

https://prodapp.belzona.com/api/
https://khia.belzona.com/khiaapi/KhiasByProduct/

Featured Video

Projects

QUESTIONS & ANSWERS

The mixing ratio of the ESD coating, Belzona 5813 is 5 parts Base to 1 part Solidifier by weight. Or 3 parts Base to 1 part Solidifier by volume. Please see the Product Specification Sheet (PSS) for more information.
To apply the chemical-resistant coating, Belzona 5813, brush away any loose contamination and remove dirt and oil, and grease. Degrease with Belzona 9111 (Cleaner/Degreaser). Abrade the substrate, if necessary, to create the recommended profile. To mix the material, transfer the entire contents of the Solidifier container into the Base container. Mix thoroughly together to achieve a uniform material free of any streakiness. Next, apply Belzona 5813 directly onto the prepared surface with a short-bristled brush or rubber squeegee. As soon as possible after the application of the first coat, apply a further coat of Belzona 5813. Suitable areas may be coated by spray using heated airless equipment. Use either a single airless pump or plural equipment capable of metering accurately and mixing the two components. Lastly, allow the product to cure. Please see the Instructions for Use (IFU) for more information.
The cure time of the flexible coating, Belzona 5813 is as follows:
Ambient temperature Light loading Mechanical/ thermal loading or water contact Chemical contact
50°F (10°C) 36 hours 8 days 12 days
68°F (20°C) 18 hours 5 days 7 days
86°F (30°C) 9 hours 2 days 5 days
104°F (40°C) 6 hours 1 ½ days 4 days
Please see the Instructions for Use (IFU) for more information. Belzona 5813