Belzona 5122 (Clear Cladding)

A water-repellent, wall waterproofing breathable treatment designed to protect masonry surfaces from water penetration.
Where to Buy

Belzona 5122 (Clear Cladding)

A water-repellent, wall waterproofing breathable treatment designed to protect masonry surfaces from water penetration.
Where to Buy
Description

Belzona 5122 (Clear Cladding) is a water-repellent, wall waterproofing breathable treatment designed to protect masonry surfaces from water penetration without altering the natural appearance of the structures, as it becomes transparent when cured.

This solvent-free, water repellent prevents spalling and cracking of surfaces such as concrete, stone and brick, while reducing dirt retention. It is supplied as a concentrate, which can be easily diluted on-site with water and applied by brush or spray to provide long-term protection and maintain building fabric insulation properties

  • Long-term water repellent for brick and masonry surfaces
  • Microporous structure allowing the substrate to breathe
  • Retains the natural appearance of the structure – transparent when cured
  • Improved building insulation properties
  • Reduced dirt retention as well as growth of mildew, moss and lichen
  • Prevents spalling and cracks as a result of freeze – thaw cycles
  • Application and cure at ambient temperature – no hot work involved
  • Reduced health and safety risks as it is solvent-free
  • Suitable for dilution on-site prior application by brush or spray
  • Excellent adhesion to a wide range of porous mineral surfaces including concrete, limestone, brick and sandstone
  • Waterproof treatment for protection of brickwork, stone and concrete structures
  • Long-term protection of statues and monuments from the damage caused by water ingress
  • Reconstructed stone protection

1 L and 25 L

Note: Sizing and availability may change per region. Please contact Belzona for details.

* All products are subject to regional restrictions. Check with your local Distributor for more information.

Product Applications

Documents

Similar Products

Can Be Used Together

https://prodapp.belzona.com/api/
https://khia.belzona.com/khiaapi/KhiasByProduct/

Featured Video

Projects

QUESTIONS & ANSWERS

Belzona recommends using Belzona 5122 (Clear Cladding Concentrate) for wall waterproofing. The material is a water-repellent and breathable treatment designed to protect masonry surfaces from water penetration without altering the natural appearance of the structures, as it becomes transparent when cured.

To apply the water repellent, Belzona 5122 (Clear Cladding Concentrate) thoroughly clean the surface to remove dirt, salt, efflorescence, or any foreign matter. Belzona 5122 is supplied in a concentrated form and must be diluted prior to application. Mix one liter of Belzona 5122 with nine liters of clean tap water in a bucket. Then, stir well to ensure that the material is completely dispersed. Next, liberally apply with either a long-bristled brush or low-pressure spray such that the progress is working up the wall. Finally, allow the product to cure. Please see the Instructions for Use (IFU) for more information.
The cure time for the waterproofing brick system, Belzona 5122 (Clear Cladding Concentrate) depends on various environmental factors; however, under normal conditions, the material will dry within 2 hours. Please see the Instructions for Use (IFU) for more information.