Belzona 4351 (Magma CR5)

A chemical resistant, static-dissipative coating for the protection of concrete and metal surfaces.
Where to Buy

Belzona 4351 (Magma CR5)

A chemical resistant, static-dissipative coating for the protection of concrete and metal surfaces.
Where to Buy
Description

Belzona 4351 (Magma CR5) is a high performance, 2-part, static-dissipative coating designed to transfer surface build-up of electrostatic charge away from hazardous areas. Furthermore, this solvent-free, chemical resistant coating isolates concrete and metal surfaces from aggressive chemicals, especially acids and alkalis. It is easy to mix and apply without the need of specialist tools and cures at room temperature.

  • Low surface resistivity allows the dissipation of electrostatic charge
  • Excellent chemical resistance against a wide range of chemicals
  • Easy to mix and apply with no specialist tools
  • Reduced health and safety risks as it is solvent-free
  • Application and cure at room temperature – no hot work involved
  • No shrinkage, expansion or distortion
  • High compressive strength
  • Excellent bonding to all rigid substrates including concrete, stone, brick, stainless steel, mild steel, carbon steel and copper
  • Static dissipative and chemically resistant coating for primary and secondary chemical containment areas
  • Fuel storage tanks and hydrocarbon tanks where fluid is agitated i.e. pumping and piping and filtration systems
  • Static dissipative coating for refineries and grain silos, highly susceptible to static charge accumulation
  • Static dissipative floor coatings for factories and warehouses

1 KG

Note: Sizing and availability may change per region. Please contact Belzona for details.

* All products are subject to regional restrictions. Check with your local Distributor for more information.

Product Applications

Documents

Similar Products

Can Be Used Together

| Belzona 1221

https://prodapp.belzona.com/api/
https://khia.belzona.com/khiaapi/KhiasByProduct/

Featured Video

Projects

QUESTIONS & ANSWERS

A static-dissipative coating will reduce static electricity to protect electrostatic-sensitive devices that store flammable substances.
To apply the industrial coating, Belzona 4351 (Magma CR5), the surface must be clean, firm, and dry. In addition, it must be free of rust, paint, and other surface coatings and contaminants. Condition the area using Belzona 4911 (Magma TX Conditioner). To mix the material, add the entire contents of the Belzona 4351 (Magma CR5) Solidifier component to the Base unit. Then, mix thoroughly until a completely homogenous liquid is achieved. After, apply the material using a short-bristled brush or a squeegee to the prepared surface. A second coating can be applied as soon as possible to do so without disturbing the first coat. Finally, allow the product to cure. Please see the Instructions for Use (IFU) for more information. Belzona 4351
The working life of the chemical-resistant coating, Belzona 4351 (Magma CR5), is as follows:
Temperature 59 °F (15 °C) 68 °F (20 °C) 77° F (25°C) 86°F (30°C)
Use all material within 35 minutes 25 minutes 20 minutes 15 minutes
Please see the Instructions for Use (IFU) for more information. Belzona 4351 (IFU)