Belzona 4331 (Magma CR3)

A high-temperature, chemical resistant coating for the protection of concrete and metal surfaces in contact with hot organic acids and other chemicals.
Where to Buy

Belzona 4331 (Magma CR3)

A high-temperature, chemical resistant coating for the protection of concrete and metal surfaces in contact with hot organic acids and other chemicals.
Where to Buy
Description

A high performance, chemical resistant coating optimised for resistance to hot organic acids such as acetic acid and organic solvents up to 90°C (194°F). This solvent-free, concrete protection coating isolates concrete and metal surfaces from deteriorating chemical environments.

Belzona 4331 (Magma CR3) provides a safe and hygienic surface which meets the USDA requirements for incidental food contact. It is simple to apply by brush in one or two coats without the need of specialist tools and cures at room temperature.

  • Excellent chemical resistance against a wide range of chemicals including hot organic acids, alkalis and strong solvents
  • USDA approved to provide safe and hygienic surfaces with no tainting of foodstuffs
  • Reduced health and safety risks as it is solvent-free
  • Application and cure at room temperature – no hot work involved
  • Good resistance to hot immersion
  • Excellent bonding to all rigid substrates including concrete, stone, brick, stainless steel, mild steel, carbon steel and copper
  • Chemical resistant material for protecting acid retaining walls, bund areas, chemical spill areas and concrete tank plinths
  • Sealing of chemical drains and channels
  • Protection of pump bases and casings from chemical spill
  • Creation of slip resistant walkways in chemical containment areas when combined with a Belzona aggregate
  • Lining of immersed equipment such as pumps, vessels or tanks to protect against acid attack

* All products are subject to regional restrictions. Check with your local Distributor for more information

1.5 KG

Note: Sizing and availability may change per region. Please contact Belzona for details.

* All products are subject to regional restrictions. Check with your local Distributor for more information.

Product Applications

Documents

Similar Products

Can Be Used Together

| Belzona 1221

https://prodapp.belzona.com/api/
https://khia.belzona.com/khiaapi/KhiasByProduct/

Featured Video

Projects

QUESTIONS & ANSWERS

Concrete can be coated with epoxy. However, before applying the epoxy coating ensure that the new concrete has cured for a minimum of 28 days for effective concrete protection.

The temperature limit of the high-temperature epoxy Belzona 4331 (Magma CR3) is typically 410 °F (210 °C), and for many applications, the product is suitable down to –40 °F (-40 °C). Please see the Product Specification Sheet (PSS) for more information. Belzona 4311
To apply the chemical-resistant coating, Belzona 4331 (Magma CR3), the surface must be clean, firm, and dry. In addition, it must be free of rust, paint, and other surface coatings and contaminants. Condition the area using Belzona 4911 (Magma TX Conditioner). To mix the material, add the entire contents of the Belzona 4331 (Magma CR3) Solidifier component to the Base unit. Then, mix thoroughly until a completely homogenous liquid is achieved. After, wet out the prepared surface using the material with a short-bristled brush or a plastic applicator before building up to the full coating thickness. Finish the application with a brush to obtain uniform coverage and allow the product to cure. Please see the Instructions for Use (IFU) for more information