Belzona 4154 (Bulkfill Resin)

A concrete repair epoxy designed to be used with an aggregate for the reparation, resurfacing and rebuilding of concrete and stonework.
Where to Buy

Belzona 4154 (Bulkfill Resin)

A concrete repair epoxy designed to be used with an aggregate for the reparation, resurfacing and rebuilding of concrete and stonework.
Where to Buy
Description

Belzona 4154 (Bulkfill Resin) is a 2-part, multi-purpose epoxy-based repair resin suitable for the rebuilding of concrete and stonework damaged by impact, vibration, chemicals, and environmental attack. Easily combined with locally sourced aggregates, Belzona 4154 provides a highly cost-effective solution, especially for large scale applications.

Belzona 4154 is ideally suited for repairs performed on horizontal surfaces as levelling material to fill large uneven areas, deep voids, gaps and cracks. This economical resin will bond strongly to most surfaces such as brick, concrete and natural stones.

To ensure high performance mandated by the operating conditions, Belzona 4154 must be overcoated with one of the Belzona products best suited for the application.

  • Outstanding corrosion protection
  • Peelable and resealable system, allowing easy access to fastenings if required
  • High visibility colour making repairs easily identifiable
  • Simple and quick to apply with no associated hot work
  • Fast cure to allow quick application
  • Excellent adhesion onto manually prepared surfaces
  • Excellent UV and environmental weathering resistance
  • Excellent heat resistance
  • Good fire resistance
  • Classed as low hazard making it safe to use
  • Brush or spray applicable
  • Sealing of flanges, fastenings, fittings, connectors and other associated pipe elements
  • Preventing or stopping moisture ingress in various systems
  • Protection of new equipment from corrosion

515 g

Note: Sizing and availability may change per region. Please contact Belzona for details.

Product Applications

Documents

Similar Products

Can Be Used Together

| Belzona 1221

https://prodapp.belzona.com/api/
https://khia.belzona.com/khiaapi/KhiasByProduct/

Featured Video

Projects

QUESTIONS & ANSWERS

An epoxy concrete repair kit is a package of epoxy resins and tools that are engineered to repair concrete and masonry surfaces.

For mixing small quantities of the concrete repair epoxy, Belzona 4154 (Bulkfill Resin), the mixing ratio by weight of the component is 6.7:1 (Base: Solidifier) or 6.7:1:53 (Base:Solidifier: Aggregate). In addition, the mixing ratio by volume is 6:1 (Base: Solidifier). Please see the Instructions for Use (IFU) for more information.
To apply the epoxy resin for concrete repair, Belzona 4154 (Bulkfill Resin), the surface must be clean, firm, and dry. New concrete should be allowed to cure for a minimum of 28 days. It is recommended to use a mechanical mixer due to the bulk and stiffness of the material. Next, to mix the material, empty the entire contents of the Base and Solidifier units into the mixing bucket while the mixer is running. Immediately with the mixer still running, slowly add the aggregate. Then, apply the material directly onto the prepared surface. First, spread to a general level using normal screeding techniques and then tap down firmly with a trowel or float to remove entrapped air, compact the material, and ensure maximum contact with the surface. Finally, allow the material to cure. Please see the Instructions for Use (IFU) for more information.