Belzona 2111 (D&A Hi-Build Elastomer)

A 2-part, abrasion resistant polyurethane resin for rubber repair, rebuilding and coating of components and metal surfaces.
Where to Buy

Belzona 2111 (D&A Hi-Build Elastomer)

A 2-part, abrasion resistant polyurethane resin for rubber repair, rebuilding and coating of components and metal surfaces.
Where to Buy
Description

Belzona 2111 (D&A Hi-Build Elastomer) is a 2-part, abrasion resistant polyurethane resin for rubber repair, rebuilding and coating of components and metal surfaces. This flexible rubber repair material is appropriate for applications where high build, durability, elasticity, high abrasion and tear resistance are required. This material is easy to mix and apply without the need for specialist tools and it cures at room temperature eliminating the need for hot work.

  • Outstanding protection against wear, impact and abrasion
  • Fast cold-curing – no hot work involved
  • Excellent adhesion to a wide variety of substrates including natural rubber, nitrile, neoprene, SBR (Styrene Butadiene Rubber), polyurethane, PVC, steel, copper and concrete
  • Seamless application – small or large areas treated in one operation
  • Outstanding mechanical strength
  • Excellent chemical resistance to a wide variety of chemicals
  • High elasticity
  • Good electrical resistance
  • Protection against erosion and corrosion
  • Creation and repair of rubber linings to provide long-term abrasion resistance
  • On site repair and encapsulation of clip joints on conveyor belts
  • Reforming and bonding of flights and cleats on conveyor belts
  • Cold-curing alternative to vulcanized rubber repair of worn, split or torn areas of rubber
  • Durable impact and wear protection on pumps volutes and impellers

* All products are subject to regional restrictions. Check with your local Distributor for more information*

500 g

Note: Sizing and availability may change per region. Please contact Belzona for details.

ABS Approval

Product Applications

Documents

Similar Products

Can Be Used Together

| Belzona 1221

https://prodapp.belzona.com/api/
https://khia.belzona.com/khiaapi/KhiasByProduct/

Featured Video

Projects

QUESTIONS & ANSWERS

The steps to apply the abrasion-resistant rubber lining, Belzona 2111 (D&A Hi-Build Elastomer), are as follows:
  • Clean the application area with Belzona 9111 (Cleaner/ Degreaser). If oil continues to form, abrade the surface with a suitable roughing tool.
  • Apply a thin, even coat of Belzona 2911 (Elastomer QD Conditioner) or Belzona 2921 (Elastomer GP Conditioner) onto the surface with a brush.
  • Stir the contents of the Solidifier container thoroughly. Then, transfer the entire contents of the Base container into the mixing bowl provided before pouring the Solidifier over the Base in the bowl. After, mix for at least three minutes and allow to stand until a gel forms (do not mix after this stage).
  • Apply Belzona 2111 with the plastic applicator provided. Then, contour the Belzona 2111 to the correct profile with the applicator provided.
  • Allow to cure.
    • For more information, please see the Instructions for Use (IFU): Belzona 2111
    Torn rubber can be restored using Belzona’s rubber repair materials. Generally, the area must be degreased and abraded. Then, apply a coat of a conditioner such as Belzona 2911 (Elastomer QD Conditioner) or Belzona 2921 (Elastomer GP Conditioner) and let it dry. After, mix the Base and Solidifier of the product in use together in the mixing bowl provided. Next, apply the material with the plastic applicator or spatula provided. Finally, contour the material to the desired finish and allow it to cure. Please see the Instructions for Use (IFU) of the Belzona product in use for more information.Belzona 2111
    How long an elastomeric coating lasts depends on the environmental factors of the equipment. In addition, it would also depend on the application thickness and whether the proper maintenance was administered.