Belzona 1818

An abrasion-resistant 2-part epoxy material for patch ideal for patch repairs on surfaces subject to high erosion and abrasive environments.
Where to Buy

Belzona 1818

An abrasion-resistant 2-part epoxy material for patch ideal for patch repairs on surfaces subject to high erosion and abrasive environments.
Where to Buy
Description

Belzona 1818 is a fast-curing repair material whose properties result in minimal downtime for damaged equipment. Depending on the ambient conditions, the product can experience full mechanical loading after only two hours. Additionally, it is surface tolerant; it can be applied directly onto manually prepared, wet, or oil contaminated surfaces and can even be applied underwater.

The abrasion-resistant material, Belzona 1818, is easy to mix and apply without the need for specialist tools, and minimal surface preparation.

Belzona 1818 abrasion-resistant material – belongs to the Abrasion Resistant Metals – Belzona products included on the Series 1000.

  • Abrasion-resistant and can withstand erosion up to temperatures of 80°C (176°F).  
  • Can be applied directly onto manually prepared, wet, or oil contaminated surfaces and can even be applied underwater.  
  • Belzona 1818 is fast curing ensuring a quick return to service. Depending on ambient temperatures, the product can experience full mechanical loading after two hours.  
  • No specialist tools are required for mixing or application. 
  • Slurry pumps
  • Grinding mills
  • Screw conveyors
  • Chutes and hoppers
  • Hydrocyclones
  • Wear plates
  • Grit pumps
  • Agitator shafts, hubs and blades
  • Dust extraction pipe work

* All products are subject to regional restrictions. Check with your local Distributor for more information

1KG


Note: Sizing and availability may change per region. Please contact Belzona for details.

Product Applications

Documents

Similar Products

Can Be Used Together

https://prodapp.belzona.com/api/
https://khia.belzona.com/khiaapi/KhiasByProduct/

Featured Video

Projects

QUESTIONS & ANSWERS

To ensure an effective molecular weld, only apply the abrasion-resistant epoxy repair system, Belzona 1818, to clean, firm, dry, and well-roughened surfaces. To achieve this, firstly clear away any loose contamination and use Belzona 9111 (Cleaner/Degreaser) to clean and degrease the surface. Following this, roughen the surface by blast cleaning, deeply scoring, or grinding. Degrease the surface again, allowing the surface to dry before combining the reactive components. To do this, transfer the entire amount of Base and Solidifier components onto the Belzona Working Surface. Mix thoroughly to achieve a uniform material free of any streakiness. Next, apply the Belzona 1818 directly onto the prepared surface with the plastic applicator or spatula provided to the suitable coverage rate. Finally, mixing tools should be cleaned immediately after use with Belzona 9111 or any other effective solvent e.g., Methyl Ethyl Ketone (MEK).   For more information, read the Instructions for Use (IFU):  Belzona 1818
The 2-part epoxy, Belzona 1818 does cure underwater. The product is highly surface tolerant meaning, Belzona 1818 can be applied directly onto manually prepared, wet, or oil contaminated surfaces and can even be applied underwater.   For more information, see the Instruction for Use (IFU): Belzona 1814
Ceramic polymer, Belzona 1818 can be bought from a local authorized Belzona distributor.   For steps on how to contact an authorized Belzona distributor follow the link: https://www.belzona.com/distributor-finder/