Gaskets And Seals

Gaskets and seals can be repaired and cast using Belzona's metal repair compounds and fluid-grade elastomeric materials.

Gaskets And Seals

Gaskets and seals can be repaired and cast using Belzona's metal repair compounds and fluid-grade elastomeric materials.

Description

Belzona’s range of cold-curing paste-grade composites and fluid-grade elastomeric materials help repair gaskets and seals.

Gaskets can be formed in situ using Belzona’s elastomeric materials without the need for long shutdowns. Custom-made seals of any desired shape or size can be cast with cold-curing elastomeric materials.

Typical Applications

Cast custom-made gaskets and seals of any desired shape and size
Bond a perfect seal between surfaces that expand and contract at different rates
Seal entry points
Rebuild sliding gate seals

Products

Belzona 2211

Belzona 2221

Belzona 2311

Belzona 5831

Belzona 1111

Industry Projects

Epoxy Bonding

Belzona epoxy bonding solutions have been enhanced to resist higher pressures and temperatures as well as demonstrate high adhesion and compressive strength.

Expansion Joint Filler for Concrete

Belzona has engineered expansion joint repair material for concrete to protect damaged floor areas and ensure long-term performance.

Wind Turbine Leading Edge Protection

Belzona’s wind turbine LEP systems provide long-term results that not only repair the leading edge but also provide protection.

Industrial Tank Repair

Belzona offers a variety of industrial tank repair systems specifically created for the maintenance of storage tanks and secondary containment areas.

Roof Waterproofing

Belzona products can repair and restore roofs using roof waterproofing materials. They can seal leaks and protect from weather conditions.

Flange Repair

Belzona flange repair systems reform damaged flange faces subjected to harsh chemicals, crevice corrosion, galvanic corrosion, and high-pressure steam.

Solutions

Questions & Answers

Can Belzona polymeric systems for gaskets and seals be applied in situ?

Yes, Belzona polymeric systems for gaskets and seals can be applied in-situ. Custom-made gaskets and seals of any desired shape or size can be created on the spot without the need for long shutdowns. Yet, a lot some time to allow the product to dry.

How do you create gaskets and seals using Belzona polymeric technology?

To create a custom-made gasket and seal using Belzona polymeric technology, first, apply a thin layer of Belzona 9411 (Release Agent) and allow to dry for 15-20 minutes. After, mix Belzona 2221 (MP Fluid Elastomer) by emptying the entire contents of the Base and Solidifier into the mixing bowl provided and mix until the material is of an even color and consistency. To cast a gasket and seal, brush a thin coat of Belzona 2221 (MP Fluid Elastomer) onto the inside of the mold previously treated with Belzona 9411 (Release Agent). Then, pour the remaining Belzona 2221 (MP Fluid Elastomer) into the mold, avoiding entrapped air, and remove any occluded air by vibrating the mold. Finally, allow the product to cure. For more information, please see the Instructions for Use (IFU)

What are gaskets and seals?

Gaskets and seals are a washer that seals the gap between two mating surfaces